Lamp cap
Female plug
Male plug
Lamp
Fuse
Assembly
REPLACING THE LAMP
CAUTION:
Risk of fire. Do not deliberately reposition either lamp holder
contact.
Wire
NE
PO
RIR
VU
O
D
A
B
C
A
B
F
OPEN
OUVRIR
E
G
E
H
□
Place a cap (B) into a metal cage (C), place a lamp cap (A) into the top of this
assembly, and twist a lamp (D) counterclockwise into the lamp cap (A). See Figure 1.
□
Repeat step 1 until all the lamps are
into the
lamp caps. See Figure 2.
Fig.1
Fig.2
WARNING:
Risk of fire. Do not replace the attachment plug. The plug contains
a safety device (fuse) that should not be removed. Discard product if the
attachment plug is damaged.
WARNING:
Risk of fire. Replace the fuse only with 5 Amp, 125 Volt fuse
(provided with product).
User Servicing Instructions
REPLACING THE FUSE
CAUTION:
To reduce the risk of fire and electric shock: a) Do not install on
trees having needles, leaves or branch coverings of metal or materials which
look like metal, and b) Do not mount or support strings in a manner that can cut
or damage wire insulation.
When the product is placed on a live tree, the tree should be well maintained and
fresh. Do not place on live trees in which the needles are brown or break off easily.
Keep the tree holder filled with water.
Use and Care Instructions
STORAGE GUIDELINES
When storing the product, carefully remove the product from wherever it is placed,
including tree, branches, or bushes, to avoid any undue strain or stress on the product
conductors, connections, and wires.
When not in use, store neatly in a cool, dry location protected from sunlight.
If the product is placed on a tree, the tree should be well secured and stable.
D
C
OPEN
OUVRIR
A
10
10
10
10
1
1
2
1
B
C
D
E
F
G
H
Cap
Metal cage
NOTE:
Before assembly, carefully remove
and
inspect all parts as listed in the
Package Contents table. If any part appears missing or damaged, do not
assemble this product. Contact Hampton Bay Customer Service.
WARNING:
Before using or reusing, inspect the product carefully. Discard any
products that have cut, damaged, or
f
rayed wire insulation or cords, cracks in the
lamp holders or enclosures, loose connections, or exposed copper wire.
□
Grasp the plug and remove from the receptable or other outlet device. Do not unplug
by
pulling on the cord.
□
Slide open the fuse cover on top of the attachment plug towards the blades.
□
Remove the fuse (E) carefully.
□
Slide the fuse access cover close on top of the attachment plug.
CAUTION:
Replace bulbs with only the same type of 5 Watt max candelabra-
base (E12) UL classi
f
ied lamps.
