□
Install the 50 Watt halogen bulb (J) (included).
□
Raise the glass shade (G) up against the bottom of
the fan housing (B), and secure it to the fan by
turning the glass (G) clockwise until snug. Do not
overtighten.
□
Restore the power, and your fan is ready for opera-
tion.
10
Finish the light kit assembly
and glass shades mounting
Assembly — Installing the Light Kit (continued)
14
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
G
J
F
B
E
Operation
WALL CONTROL OPERATING INSTRUCTIONS
WALL CONTROL OPERATING INSTRUCTIONS
Restore power to the ceiling fan, and test for proper operation.
“ ” buttons: The fan 4-speed control is used to set the fan speed
as follows: = Turns the fan off, 1 = High Speed, 2 = Medium
High Speed, 3 = Medium Speed, and 4 = Low Speed.
“ ” buttons: The button will turn the light on and off and will
also control the light brightness. Slide the button to set the desired
light brightness.
