HAMPTON BAY Miramar, Руководство пользователя

Страница: 14 / 18

11
Interior Bulb Replacement
REMEMBER
to turn off the power
1.
2.
3.
Remove the 2 screws from the light cover from
the top decorative housing as shown in Fig. 19.
Replace the defective bulb (15W, 120V AC
CANDELABRA base).
Place the light cover back to the top decorative
housing and secure the screws in position.
1.
2.
The receiver frequency selector is located on
the top of the motor assembly plate as show in
Fig. 20.
The transmitter frequency selector is located in
the battery compartment as show in Fig. 21.
Each frequency selector has 4 switches, you
may use any number of possible combinations
but you must set each switch in the transmitter
to match the same switch in the receiver.
Figure 21
Frequency
Switch
Figure 19
Screws
Motor
Housing
Light Cover
Bulbs
Figure 20
Code
Switch
Operating Your Transmitter
Installing the Battery:
Install 9 volt battery (not included), to prevent
damage to transmitter, remove the battery if not
used for long periods. (Figure 22)
Figure 22
9
Vo
lt
B
at
te
ry