HAMPTON BAY Minuet III AG806C-EB, Руководство пользователя

Страница: 13 / 18

9
Attaching the Fan Blades
NOTE
MOTOR IS SHIPPED WITH RUBBER PACKING
MOUNTS TO PREVENT MOVEMENT DURING
TRANSPORTATION. REMOVE 5 RUBBER
PACKING MOUNTS FROM FAN MOTOR
ASSEMBLY AND DISCARD PRIOR TO
ATTACHING BLADE ARMS. (FIG. 16)
Figure 17
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY,
DO NOT BEND THE BLADE ARMS WHILE
INSTALLING, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NO INSERT FOREIGN
OBJECTS BETWEEN ROTATING FAN BLADES.
Rubber packing mounts
Screws
Blade
Screws with
Fiber Washers
Blade Arm
Motor
Blade Arm
Slot
Tab
Figure 18
Figure 16
Attach blades to blade arms using three screws
with fiber washers (Fig. 17). Start a screw into
the blade arm, do not tighten. Repeat for the 2
remaining screws and washers.
Tighten each screw securely starting with the
center screw. Make sure the blade is straight.
Repeat steps for the remaining blades.
Fasten the blade assemblies to the motor by
lining up the slots of the blade arms with the
tabs on the motor, then tighten the two screws
and washers already installed in the blade arms
(Fig. 18).
Repeat procedure with remaining blade arms.
1.
2.
3.
4.