Assembly
Attaching the leg to the table top
1
Covering the bolts
2
5
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Place the table top (A) upside down so the pre-drilled
corner holes are visible.
Align and attach the table legs (B) to the corners of the table
top (A), by inserting bolts (AA) with metal washers (BB)
through the pre-drilled holes.
Loosely tighten with the hex wrench (DD).
Tighten all the bolts using the hex wrench (DD) and then
cover them with the plastic bolt caps (CC).
With assistance, carefully turn the table in the upright
position.
Your table is now ready for use, so, relax & enjoy!
AA
CC
AA
BB
BB
A
B
IMPORTANT:
attached and initially tightened only a few revolutions.
Then tighten further, one at a time, alternating between
the four legs. Do NOT fully tighten one leg before you
attach the other legs.
Each of the four leg bolts should be
Turning the table
3