5.
Figure 7
Making the Electrical
Connections
REMEMBER
to disconnect the power.
If you feel you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
Follow the steps below to connect the fan
to your household wiring. Use the wire
connecting nuts supplied with your fan.
Secure the connectors with electrical tape.
Make sure there are no loose strands or
connections.
Connect the ground conductor of the 120v
1.
supply (this may be a bare wire or a wire
with green colored insulation) to the green
ground leads from the motor bracket and the
mounting plate of the fan (Figure 7).
Connect the fan motor white wire to the
2.
supply white (neutral) wire using a wire nut
supplied (Figure 7).
Connect the fan motor black and blue wires
3.
to the supply black (hot) wire using a wire
nut supplied (Figure 7).
After connecting the wires, spread them
4.
apart so that the green and white wires are
on one side of the outlet box and the black
wire is on the other side.
Turn the wire connecting nuts upward and
5.
push the wiring into the outlet box.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE A SOLID STATE SPEED CONTROL
WITH THIS FAN. IT WILL PERMANENTLY DAMAGE THE ELECTRONIC CIRCUITRY.
CHECK TO SEE THAT ALL CONNECTIONS ARE TIGHT, INCLUDING GROUND, AND THAT NO BARE
WIRE IS VISIBLE AT THE WIRE NUTS, EXCEPT FOR THE GROUND WIRE.
ELECTRICAL DIAGRAMS ARE FOR REFERENCE ONLY. OPTIONAL USE OF ANY LIGHT KIT SHALL BE
UL LISTED AND MARKED SUITABLE FOR USE WITH THIS FAN.
