11
11
Installing the Battery:
"HI, MED, LO"
buttons:
These three buttons are used to set the fan
speed as follows:
LO
=Low speed,
MED
= Medium speed
HI
=High speed
"FAN OFF"
button:
This button turns the fan off.
The
"LIGHT/DIMMER"
button turns the
light ON or OFF and also controls the bright-
ness setting. Press and release the button to
turn the light ON or OFF. Press and hold the
button to set the desired brightness. The light
key has an auto-resume, it will stay at the same
brightness as the last time it was turned off.
The
"REVERSE"
button is used to set the fan
forward or reverse, press the button forward
(for warm weather) or reverse (for cool
weather).
1.
2.
3.
4.
Install
9 volt
battery (not included), to prevent
damage to transmitter, remove the battery if not
used for long periods (Figure 19).
Restore power to the ceiling fan and test for
proper operation.
Figure 19
Operating Your Transmitter
Figure 20
LIGHT / DIMMER
LO
MED
HI
FAN OFF
REVERSE
9
Vo
lt
B
at
te
ry
