4
Assembly (continued)
1
Attaching the legs to the table top
2
Completing the Assembly
□
Place all parts on a flat, clean surface .
□
Place the Table Top (A) upside down on a soft,
clean surface .
□
Attach the Table Legs (B) to the Table Top (A),
using the Bolts (AA) and Washers (BB) .
□
Please make sure Table Legs (B) are in the
correct direction as drawing below . Then
tighten all bolts with the Hex Wrench (CC) .
□
Turn the table over, then adjust self-
leveling feet on the table for equal balance
(as shown) .
□
Now the table is ready for use .
BB
B
A
AA