8
Installation (continued)
5
Attaching the downrod assembly
to the motor
6
Installing the mounting bracket
□
Loosen, but do not remove the collar screw (DD) on the
collar (1) of the motor (C).
□
Guide the downrod assembly into the collar (1) of the motor
(C). Ensure that all of the holes are properly aligned.
□
Carefully insert the downrod pin (CC) through the holes in
the collar (1) and downrod (D).
□
Insert the downrod clip (BB) through the hole near the end
of the downrod pin (CC) until it snaps into its locked
position.
□
Re-tighten the collar screw (DD) on the collar (1) on top of
the motor (C).
□
Attach the mounting bracket (G) to the outlet box in the
ceiling using washers (EE), star washers (FF), lockwashers
(GG), and mounting bracket screws (HH). Tighten securely
with a Phillips screwdriver.
HH
GG
FF
EE
G
1
DD
BB
F
C
A
CC
D
DPA12122005 新版 SIZE:216X280MM 80g模糙纸 28P 单黑色 骑马钉 2013-4-17 第 8／28页
