Assembly
Attaching the table legs to
the table top rim
1
Assembling the table shelf to the legs
2
5
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Place the table top rim (A) upside down so the pre-drilled
corner holes are visible.
Next, attach the four table legs (B)
to the table rim (A) by inserting the bolts (AA) with metal
washers (BB) through the pre-drilled holes.
Loosely tighten with the hex wrench (DD).
Attach the table shelf (C) to the four legs (B) by inserting
bolts (AA) with metal washers (BB) through the holes on the
inside of the legs.
Tighten all the bolts using the hex wrench (DD) and then
cover them securely with the plastic bolt caps (CC).
Turn the table in the upright position and with help,
carefully place the glass top (D) onto the frame.
Your table is now ready for use, so relax & enjoy!
A
B
BB
AA
AA
BB
B
C
B
BB
AA
B
A
cc
cc
IMPORTANT:
Do not tighten completely.
IMPORTANT:
attached and initially tightened only a few revolutions.
Then tighten further, one at a time, alternating between
the 4 legs. Do NOT fully tighten one leg before you
attach the other legs.
Each of the four leg bolts should be
Assembling the bolt caps and
placing the glass top
3
D