HAMPTON BAY HBLG5000 Скачать руководство пользователя страница 10

Do not under any 
circumstances cut 
or remove the 
grounding prong 
from the plug.

Line Cord Plug

Use Wall Receptacle

Power Supply

Power supply cord with
3-prong grounding plug

Standard 125V, 3-wire grounding
receptacle rated 15A, 125V AC

Use 15 AMP, time
delay fuse or circuit 
breaker.

TYPE B

SASH SEAL

(TYPE E)

L BRACKET

TYPE A

DRAIN PIPE

DRAIN CAP

TYPE B

Support Bracket (TYPE G)

10

Features

and

Installation

Fig. 12

Fig. 13

Fig. 14

4. SECURE THE GUIDE PANELS

Extend the guide panels (TYPE F) to fill the window
opening using 4 screws (TYPE B) to secure them, as
shown in Fig. 12. 

5. INSTALL THE SASH SEAL AND SASH LOCK

a. Cut the sash seal (TYPE E) to the window width.

Stuff the sash seal between the glass and the
window to prevent air and insects from getting into
the room, as shown in Fig. 12.

b. Fasten  the  bracket using a screw (TYPE A), as

shown in Fig. 12.

6. a. Remove the screws that secure the cabinet and

base pan in the right side.

b. Fasten the suport bracket (TYPE G) using a

removed screw. Attach the suport bracket (TYPE G)
in the inner window sill with a screw (TYPE B), as
shown Fig. 13.

7. Window installation of room air conditioner is now

completed. See ELECTRICAL DATA for attaching
power cord to electrical outlet.

C. HOW TO SECURE THE DRAIN PIPE

In humid weather, excess water may cause the BASE
PAN to overflow. To drain the water, remove the
DRAIN CAP and secure the DRAIN PIPE to the rear
hole of the BASE PAN. (Fig. 14) Press the drain pipe
into the hole by pushing down and away from the fins
to avoid injury.

REMOVAL FROM WINDOW

Turn the air conditioner off, disconnect the power cord, remove the bracket, the screws and Support Bracket
installed through the top and bottom of the guide panels, and save for reinstallation later. Close the guide panels.
Keeping a firm grip on the air conditioner, raise the sash, and carefully tilt the air conditioner backward, draining
any condensate.  Lift the air conditioner from the window and remove the sash seal from between the windows.

USE OF EXTENSION CORDS

Because of potential safety hazards, we strongly discourage the use of an extension cord. However, if you wish to
use an extension cord, use a CSA certified/UL-listed 3-wire (grounding) extension cord, rated 15A, 125V.

Electrical  Data

Hang

Push

Содержание HBLG5000












Отзывы: