Assembly
1
Attaching Side Panels to the Bottom Panel
• Place the bottom panel (D)
on a level surface.
• Slide a side panel (E) onto the
bottom panel (D), then repeat
with the other panel.
E
E
D
Assembly
6
Attaching the Bracket/Hinge
• Position the Bracket/Hinge
(H) into the grooves at the top
inside corner of the back panel
(B). Secure in place using
three Machine Screws (J) and
two Self-Tapping Screws (G).
• Use two Machine Screws (J)
to attach the Bracket/Hinge
(H) to the Side Panel (E).
• Use one Machine Screw (J)
to attach the Bracket/Hinge
(H) to the Back Panel (B). Use
two Self-Tapping screws (G)
to attach Braket/Hinge (H)
to the Back Panel (B).
• Repeat this process to
assemble the other Bracket/
Hinge (G).
E
B
H
G
J
Assembly
7
Attaching the Bracket/Hinges to the Lid Panel
• Attach the Bracket/Hinge (H)
to the inside of the Lid Panel
(C) with four Self-Tapping
Screws (G) on each Bracket/
Hinge (H).
90°
H
G
C
Assembly
8
Attaching the gas Shocks
• Attach the Gas Shocks (I)
to the two round nubs on
the Bracket/Hinges (H) by
pushing both ends until you
hear a “snap.”
H
I
Assembly
4
Attaching Front and Back Panels to the Bottom Panel
Be sure front and back panel tabs are
engaged to the base panel.
• Rotate box so that the bottom side is up. Using finger
pressure, snap base panel onto back panel tabs.
• Repeat this process for front panel.
Assembly
2
Attaching the Back Panel
• Slide the back panel (B) into
position using the slots at
the rear edge of the two side
panels (E).
• Press the lock tabs (1) into
the slots (2) in the bottom
panel and lock in place.
E
E
B
D
1
2
Assembly
3
Attaching the Front Panel
• Slide the front panel (A) into
position using the slots at the
front edge of the two side
panels (E).
• Press the lock tabs (1) into
the slots (2) in the bottom
panel and lock into place.
A
D
1
2
Assembly
5
Attaching the Lid
• Hold the Lid Panel (C)
horizontally and align the lid
tabs (1) with the back panel
hinge pins (2).
• Push the Lid Panel (C)
horizontally into the back
panel hinge pins (2) and
rotate the Lid (C) closed
to lock into place.
C
1
2
90°