HAMPTON BAY Hawthorne II, Руководство пользователя

Страница: 13 / 18

10
Installing the Light Kit
1.
2.
3.
4.
5.
6.
CAUTION
BEFORE STARTING INSTALLATION,
DISCONNECT THE POWER BY TURNING OFF
THE CIRCUIT BREAKER OR REMOVING THE
FUSE AT FUSE BOX. TURNING POWER OFF
USING THE FAN SWITCH IS NOT SUFFICIENT
TO PREVENT ELECTRIC SHOCK.
Mounting
Plate
Wire Connectors
Light Kit Assembly
Screws
Figure 16
7. Restore power and your light kit is ready for
operation.
NOTE
LIGHT BULBS HAVE NO WARRANTY; CAN BE
PURCHASED AT ANY HOME DEPOT STORE.
Light Kit Assembly
Bulbs
Glass Shade
Pull Chains
Plastic Nut
Decorative Nut
Glass Cap
Figure 17
NOTE
MAKE SURE TO LEAVE ENOUGH SPACE
BETWEEN THE FAN PULL CHAIN AND THE
BULBS SO THE CHAIN DOESN'T RUB AGAINST
ANY OF THE BULBS.
Remove 4 screws from the mounting plate.
While holding the light kit assembly under
your fan, snap together the wire connection
plugs.
Secure the light kit assembly to the mounting
plate with the 4 screws previously removed.
(Fig. 16)
Install 3 x 40W candelabra bulbs (included).
Remove the decorative nut, glass cap and
plastic nut from the light kit stem. Raise the
glass shade up against the mounting plate and
secure it with the plastic nut. Do not
overtighten. Place the glass cap over the light
kit stem and secure it with the decorative nut.
(Fig. 17)
Insert the 2 pull chain through the eyelet in the
shade and cap. Secure the glass cap and
decorative nut provided (Fig. 17).