HAMPTON BAY H15U-NG Скачать руководство пользователя страница 6

6

Hampton® H15U-NG/LP Direct Vent Freestanding Gas Stove

safety label

This is a copy of the label that accompanies 
each  Direct Vent Freestanding Gas Stove. We 
have  printed  a  copy  of  the  contents  here  for 
your review. 

NOTE:

  Hampton

®

  units  are  constantly  being 

improved.  Check  the  label  on  the  unit  and  if 
there  is  a  difference,  the  label  on  the  unit  is 
the correct one.

920-426

564

564

H15U-NG

Modèle

 

H15U-NG

H15U-LP

H15U-LP

C# 4001172

 

APPAREIL FONCTIONNANT AU GAZ PROPANE

APPAREIL FONCTIONNANT AU GAZ NATUREL

Listed:

 VENTED GAS FIREPLACE HEATER /

FOYER AU GAZ À ÉVACUATION

Certified to /Certifié : ANSI Z21.88-2019

MAY BE INSTALLED IN MANUFACTURED (MOBILE) HOMES

AFTER FIRST SALE

Refer to Intertek’s Directory of Building Products for detailed information.

Pour plus de détails, se reporter au Répertoire des produits de construction de Intertek.

3.5

0.87

1.6

0.40

47

18,000

12,700

(5.28 Kw/h)

(3.72 Kw/h)

Model/Modèle :

Pression d’alimentation minimale

Pression manifold élevée

Pression manifold basse

Débit calorifique maximal

Débit calorifique minimal

Taille de l’orifice

Altitude

Pression d’alimentation minimale

Pression manifold élevée

Pression manifold basse

Débit calorifique maximal

Débit calorifique minimal

Taille de l’orifice

Altitude

11

10

2.74

WC/C.E.

2.49

6.4

1.59

18,000

 (5.28 Kw/h)

15,500

4.54

55

Model/Modèle :

ÉLECTRICAL SUPPLY/ALIMENTATION ÉLECTRIQUE : 115V_60HZ less than/moins de 2 A.

For Use Only with Barrier (Part #382-005). Follow Installation Instructions.

o

Utiliser uniquement avec un écran de sécurité (pièce n  382-005). Suivre les consignes d’installation.

NOT FOR USE WITH SOLID FUELS / NE PAS UTILISER AVEC UN COMBUSTIBLE SOLIDE

FPI Fireplace Products International Ltd. Delta, BC, Canada 

 

Made in Canada / Fabriqué au Canada

H15U-NG

Modèle

 

H15U-LP

Left Side Wall

Right Side Wall

Horizontal

Pipe

Left Side Wall

Right Side Wall

Vertical

Pipe

Dégagement par rapport aux matériaux combustibles

Minimum hauteur de plafond sur le dessus de l’appareil :

: 24"/610mm

A  6" / 150mm                 C  2" / 50mm

B  0"/ 0mm                      E  2" / 50mm

See Manual for details / Voir manuel pour plus de détails.

This appliance must be installed in accordance with local codes, if any; if none, follow the National Fuel Gas Code, ANSI Z223.1, or Natural Gas 

and Propane Installation Code, CSA B149.1.This appliance must be installed in accordance with the Standard CAN/CSA Z240 MH, Mobile 

Housing, in Canada, or with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, in the United States, or when 

such a standard is not applicable, ANSI/NCSBCS A225.1/NFPA 501A, Manufactured Home Installations Standard or ANSI A119.2 ou NFPA 

501C Standard for Recreational Vehicles.

This appliance is only for use with the type of gas indicated on the rating plate and may be installed in an aftermarket, permanently located, 

manufactured (mobile) home where not prohibited by local codes. See owner's manual for details. Optional Fan Kit (Part # 382-917)

Installer l'appareil selon les codes ou règlements locaux, ou, en l'absence de tels règlements, selon les codes d'installation ANSI Z223.1, National 

Fuel Gas Code ou CSA-B149.1 en vigueur.Installer l'appareil selon la norme CAN/CSA-Z240, Série MM, Maison mobiles ou CAN/CSA-Z240 VC, 

Véhicules de camping, ou la norme 24 CFR Part 3280, Manufactured Home Construction and Safety Standard. Si ces normes ne sont pas 

pertinentes, utilisez la norme ANSI/NCSBCS A225.1/NFPA 501A, Manufactured Home Installations Standard, ou ANSI A119.2 ou NFPA 501C 

Standard for Recreational Vehicles.

Cet appareil doit être utilisé uniquement avec le type de gaz indiqué sur la plaque signalétique. Cet appareil peut être installé dans une maison 

préfabriquée ou mobile (É.-U. seulement) installée à demeure si les règlements locaux le permettent. Voir la notice de l'utilisateur pour plus de 

renseignements. Cet appareil ne peut pas être utilisé avec d'autres gaz sauf si une trousse de conversion certifiée est fournie.

 

Kit du ventilateur en 

o

option (Pièce n  382-917) 

This vented gas fireplace heater is not for use with air filters.          Ne pas utiliser de filtre à air avec ce foyer au gaz à évacuation.                                                                                          

For use with glass doors certified with the appliance only.                      À utiliser uniquement avec les portes vitrées certifiées avec l'appareil.

For  the  State  of  Massachusetts,  installation 
and  repair  must  be  done  by  a  plumber  or 
gasfitter  licensed  in  the  Commonwealth  of 
Massachusetts.

For the State of Massachusetts, flexible con-
nectors shall not exceed 36 inches in length.

For the State of Massachusetts, the appliances 
individual manual shut-off must be a t-handle 
type valve.

The  State  of  Massachusetts  requires  the 
installation  of  a  carbon  monoxide  alarm  in 
accordance with NFPA 720 and a CO alarm 
with battery back up in the same room where 
the gas appliance is installed.

Decal location

Fold down access door, and then remove two screws 
as shown below
 

 

 

 

 

With the panel removed, the gas valve will be visible. 
The rating plate will be attached to a black chain 
located under the IFC. 

DO NOT REMOVE THE DECAL FROM THE UNIT.

Содержание H15U-NG

























































Отзывы: