Assembly — Installing the Light Kit
11
Attaching the light kit to
the switch housing
□
Remove the three light kit mounting screws (OO)
from the light kit (J) and keep these screws.
□
While holding the light kit (J) under your fan motor
assembly (G), locate two single white and blue wires
in the switch housing labeled "FOR LIGHT". Make the
polarized plug connections (PP):
- White to white
- Blue to black
□
Carefully push all wires back into the switch housing.
Install the light kit (J) onto the switch housing with
the three light kit mounting screws (OO) provided. Be
sure to tighten all screws.
CAUTION:
Before starting the installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
12
J
G
OO
PP
G
CC
RR
J
K
Installing the light bulbs
and glass shade
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
□
Install two 9 watt LED bulbs (CC) (included).
□
Position the notches (QQ) in the outer rim of the glass
shade (K) so they line up with the tabs (RR) on the
inside of the rim on the light kit (J). Carefully lift the
glass (K) up inside the light kit (J) and secure it to the
fan by turning the glass shade (K) clockwise until
snug. DO NOT OVERTIGHTEN.
16
