3
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
CAUTION: Risk of Electric Shock. DO NOT open
or try to repair the heater yourself.
CAUTION:
Use only for intended household use as
described in this manual. Any other use not
recommended by the manufacturer may cause fire,
electric shock, or injury to persons. The use of
attachments not recommended or sold by
unauthorized dealers may cause hazards
WARNING:
To reduce the risk of fire or electric
shock, DO NOT use this unit with any solid-state
speed control device.
1. DO NOT run cord under carpeting. DO NOT
cover cord with throw rugs, runners, or similar
coverings. Arrange cord away from traffic area
and where it will not be tripped over.
2. Always plug heaters directly into a wall outlet
receptacle. Never use with an extension cord or
relocatable power tap (outlet/power strip).
3. To disconnect heater, turn controls to OFF,
then remove plug from outlet. Pull firmly on the
plug, DO NOT unplug by pulling on the cord.
4. Always unplug the unit before moving or
cleaning, or whenever the heater is not in use.
5. Always use on a dry, level surface. Use on floor
only.
6. DO NOT use outdoors.
OVERHEAT SAFETY FEATURE
This heater is equipped with an overheat safety feature.
When the internal components of the heater reach a
certain temperature that could cause overheating and
possible fire, the heater will automatically shut off.
At this time, the customer should turn off the power
switch, unplug the cord, and allow the product to
cool for 5 minutes, then plug in and start again.
THIS APPLIANCE HAS A
POLARIZED PLUG (one
blade is wider than the
other). To reduce the risk
of electric shock, this plug
is intended to fit in a
polarized outlet only one
way. If the plug does not
fit fully in the outlet,
reverse the plug. If it still
does not fit, contact a
qualified electrician to
install the proper outlet.
DO NOT ATTEMPT TO
MODIFY THIS PLUG OR
DEFEAT THIS SAFETY
FEATURE IN ANY WAY.
WARNING
: It is normal for the power cord to feel
warm to the touch; however, a loose fit between the
outlet and the plug may cause overheating of the
plug. If this occurs, try inserting the plug into a
different outlet. Contact a qualified electrician to
inspect the original outlet for damage.
