Assembly (continued)
Installing the Battery
2
K
G
Turn the cylinder valve on the top of tank clockwise to close off the gas supply. See Figure a.
Screw the regulator coupling clockwise by hand only. Make sure it is fastened. See Figure b.
a
b
To install the battery (G), unscrew the rubber cap of the electric igniter (K) and place the battery (G) into the battery
case. Make sure the positive pole ("+") faces out towards the cap. Screw the cap back onto the battery case tightly.
Replace the door (C) onto the body (B) and turn the door knob (N) to secure.