HAMPTON BAY FANELEE Скачать руководство пользователя страница 11

11

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly - Hanging the Fan (continued)

5

Wiring the receiver to the 
household wiring

 

Spread the wires apart so that the green and white wires 
are on one side of the outlet box and the black wire is on the 
other side.

 

Connect the green fan wires to the household ground wire 
(this may be a green or bare wire) using a wire connecting nut 
(BB).

 

Connect the receiver (H) black or red wire to the household 
black (hot) wire using a wire connecting nut (BB).

 

Connect the receiver (H) white wire to the household white 
wire (neutral) using a wire connecting nut (BB).

 

Secure each wire connecting nut using electrical tape.

WARNING:

 To avoid possible electrical shock, turn the 

electricity off at the main fuse box before wiring. If you 

feel you do not have enough electrical wiring knowledge or 

experience, contact a licensed electrician.

WARNING:

 Each wire nut supplied with this fan is designed 

to accept up to one 12-gauge house wire and two wires 

from the fan. If you have larger than 12-gauge house wiring 

or more than one house wire to connect to the fan wiring, 

consult an electrician for the proper size wire nuts to use.

IMPORTANT:

 Use the wire connecting nuts (BB) supplied 

with your fan. Secure the connectors with electrical tape 

and ensure there are no loose strands or connections.

6

Wiring the fan to the receiver

NOTE:

 The fan comes with 12 in. lead wires for use with 

the provided 6 in. ball downrod assembly (B). If you wish 
to use longer downrod, you can use the extension lead 
wire (42 in.) (J) provided.

 

If using the 6 in. ball downrod assembly (B) provided, wire the 
receiver to the fan wires by connecting the molded adaptor 
plug from receiver (H) with molded adaptor of the fan motor 
assembly (E) together.

 

If you wish to use longer downrod, you can use the extension 
lead wire (42 in.) (J) provided by connecting the molded 
adaptor together.

Outlet box

in the ceiling

(MM)

Green

1 2 3 4

ON DIP

J

Black 

Black

Green (or Bare)

Green

Outlet Box

Receiver

Antenna

White

Receiver (H)

BB (x3)

DIP

Antenna

WIFI

Содержание FANELEE

















Отзывы: