1
2
4
Attach the metal leg (B) to the table top (A) by using two
bolts (Ea) through two washers (Ed), through the table leg (B)
and into the table top (A).
Do not tighten completely.
Repeat procedure for the other three legs.
Attach the metal center ring (C) to the table legs (B) by using two
bolts (Ea) through two washers (Ed), through metal center ring (C) and
into table leg(B).
Do not tighten completely.
Repeat procedure for the other three legs.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Remove all the bolts (Ea, Ec) and
washers from the table top (A) and
table legs (B)
Attaching the metal center ring
to the table legs
Installation
3
Attach the center support bar to
the metal center ring
Attach the center support bar (D) to the metal center ring (C)
by using a bolt (Eb) through a washer (Ed), through the support
bar (D and into the metal center ring (C).
Do not tighten completely.Repeat procedure for the other side.
Turn table upright, then tighten all bolts by diagonal pattern.
Carefully adjust leg levelers to compensate for uneven ground.
Your table is now ready for use.
4
Attach the center support bar to
the table top
Attach the center support bar (D) to the table top (A) by using
two bolts (Ea) through two washers (Ed), through the support
bar (D and into the table top (A).
Do not tighten completely.
Repeat procedure for the other side.
Ea
Ed
B
B
A
A
B
C
B
Ed
Ea
A
D Ea
Ed
D
A
A
C
Eb
Ed
C
D
