12
Installing the Light Kit
Raise and hold the light kit close to the
mounting plate and proceed to do the wire
connections. Connect the white wire
connectors from the light kit and fan, follow
the same procedure with the blue and black
wire connectors. (Fig. 22)
Carefully push all wires back into the
mounting plate, then install the light kit onto
the mounting plate with 3 screws provided. Be
sure to tighten all screws. (Fig. 22)
Install 13 Watt compact fluorescent bulb
(included).
Raise glass shade up against the light kit and
secure it to fan by turning glass clockwise until
snug.
DO NOT OVERTIGHTEN
. (Fig. 22)
Restore power and your light kit is ready for
operation.
1.
2.
3.
4.
5.
NOTE
LIGHT BULBS HAVE NO WARRANTY; CAN BE
PURCHASED AT ANY HOME DEPOT STORE.
NOTE
BEFORE STARTING INSTALLATION, DISCON-
NECT THE POWER BY TURNING OFF THE
CIRCUIT BREAKER OR REMOVING THE FUSE
AT FUSE BOX. TURNING POWER OFF USING
THE FAN SWITCH IS NOT SUFFICIENT TO
PREVENT ELECTRIC SHOCK.
Figure 22
Screws
Light Kit
Glass Shade
Wire Connection Plugs
Mounting Plate
Bulb
