7
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Standard Ceiling Mount
Preparation for standard mounting
1
☐
Pull off the magnetic canopy bottom cover (HH) from the
canopy (C).
☐
Loosen the two canopy screws (II) located in the bottom of the
mounting bracket (A), and turn the canopy counterclockwise to
remove the mounting bracket (A) from the canopy (C).
NOTE:
The magnet is pre-attached on the canopy bottom
cover (HH) for you to remove and install easily.
A
C
II
HH
Attaching the blades to
the blade arms
2
☐
Attach a blade (G) to the blade arm (F) by aligning the holes on
the blade decorative nut (GG) with the holes on blades (G) and
blade arms (F), inserting the screws (FF) into the holes in the
decorative nut (GG) and through the blade (G) and blade arm (F).
☐
Tighten each screw to secure the blade (G).
☐
Repeat this step for each blade (G) and blade arm (F).
F
FF
GG
G
Attaching the blade assembly
to the motor assembly
3
☐
Fasten the blade/blade arm assembly to the fan motor
assembly (E) by aligning the two screw holes on the blade
arm (F) with the two screw holes on the top of the fan motor
assembly (E) and tightening the blade arm screws (EE).
☐
Repeat this step for the remaining blade assemblies.
EE
E
