5
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
1
Attaching the bases to the top
2
Attaching the bases
3
4
Completing the assembly
□
□
□
□
Adding the caps
Check and make adjustments as needed.
Fully tighten all the bolts (AA) and bolts (BB) with the Hex
wrench (EE) and cover with the bolt caps (DD).
□
Adjust leg levelers as required.
Place the table right side up.
This table is now ready for your enjoyment.
□
Place the large base (B) face down on a soft surface.
Attach the small base (C) to the large base (B) by aligning
holes on the small base (C) with the holes on the large
base(B). The bases must be attached as this image shown.
Insert
□
□
Place the top (A) face down on a soft surface.
Attach the large base (B) and small base (C) to the top (A)
by aligning holes on the large base (B) and small base (C)
with the holes on the top (A). Secure alternating sides on
legs when lining up holes. Insert bolts (BB) and washers (CC) .
□
bolts (AA) with washers (CC) and hand tighten.
Do not tighten completely.
C
C
A
AA
CC
BB
CC
DD
B
B
AA
CC
C
A
B
DD
D
Put the grey painted glass (D) on the table top. Make sure
the glass top is surrouned by the frame. Attention:
The grey
side of the glass is the top.
□
WARNING: If you put the wrong side of the glass on
the table top, injuries can occur.