2
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
CAUTION:
If a dimmer control switch is used with
this fixture, obtain professional advice to determine the
correct type and electrical rating required.
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of one (1) year from
date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If
this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the
product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications,
alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-
up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the
product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material
or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is
considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether express or implied,
of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and
shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in the
replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
Table of Contents
Safety Information
Warranty
Table of Contents ................................................................................2
Safety Information ..............................................................................2
Warranty .............................................................................................2
Pre-Installation ...................................................................................3
Planning Installation .....................................................................3
Hardware .....................................................................................3
Package Contents ........................................................................4
Installation ..........................................................................................5
Operation ............................................................................................6
Care and Cleaning ..............................................................................6
Troubleshooting ..................................................................................6
WARNING:
Be careful not to damage or cut the wire
insulation (covering) during fixture installation. Do not
permit wires to contact any surface with a sharp edge.
This may damage or cut the wire insulation, which
could cause serious injury or death from electric shock.
CAUTION:
Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have resulted
during shipping. If there is a defect in the wire, do not
attempt installation. Please call our Customer Service
Team at 1-855-HD-HAMPTON.
Consult a qualified electrician if you have any electrical questions.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
