HAMPTON BAY Bryant, Руководство пользователя

Страница: 11 / 17

Attaching the Fan Blades 7.
Attaching the Fan Blades
Step 1. Attach the blades to the blade brackets
using the screws provided as shown in Figure 11.
Start a screw into the blade bracket, but do not
tighten. Repeat for the 2 remaining screws and
washers.
Step 2. Tighten each screw securely. Make sure the
blade is straight.
Step 3. Use the 10 screws from the loose parts bag
containing(c). Fasten the blade assemblies to the
motor (Figure 12) then tighten the two screws to
each blade assemblies (Figure 12A).
Step 4. Install an optional light kit if you wish.
Follow the instructions installing with the light kit.
Touching
ceiling
Figure 13
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT
BEND THE BLADE HOLDERS WHILE INSTALLING,
BALANCING THEBLADES, OR CLEANING THE FAN.
DO NOT INSERT FOREIGN OBJECTS BETWEEN
ROTATING FAN BLADES.
The following procedure should correct most fan
wobble issues. Check after each step.
Step 1. Check that all blades and blade bracket
screws are secure.
(Please refer to
the introduction provide in the blade balancing kit,
which is individually packed . )
Step 2. M ost fan wobble problems are caused
when blade levels are unequal. Check this level by
selecting a point on the ceiling above the tip of one
of the blades. Measure this distance as shown in
Figure 13. Rotate the fan until the next blade is
positioned for measurement. Repeat for each
blade. The distance should be equal within 1/8".
If all blade levels are not equal, you can adjust the
blade level with the following procedure.
Step 3. Use the enclosed Blade Balancing Kit if the
blade wobble is still noticeable.
Step 4. If the blade wobble is still noticeable,
interchanging two adjacent (side by side) blades
can redistribute the weight and possibly result in
smoother operation.
Figure 12
Motor assembly
Blade Bracket
Blade
bracket
Blade
Screws
Figure 11
Washer
Figure 12A
Blade Bracket
Screw
Motor Assembly