4
Assembly
1
Connecting the ottoman legs
2
Connecting the leg connector to
the ottoman legs
□
Lay one of the ottoman legs (A) flat on the ground.
□
Align the three holes on one side of the ottoman seat (B) to
the three holes on the ottoman leg (A).
□
Attach the ottoman seat (B) to the ottoman leg (A) using
M6x40 bolts (AA), M6 washers (DD), and spacers (CC).
□
Repeat this step for the other ottoman leg (A).
3
Tightening the bolts
□
Tighten all bolts and ensure that all
connections are secure before use.
□
Place the seat cushion (D) on the ottoman
NOTE
: Loosely tighten all bolts using hex wrench (EE).
□
Align the holes of the leg connector (C) with the holes on
the inside of each ottoman leg (A).
□
Attach the leg connector (C) to ottoman legs (A) with
M6x18 bolts (BB) and M6 washers (DD).
□
Once all bolts are in place, fully tighten all bolts and ensure
that all connections are secure before use.
Care and Cleaning
□
For best results, clean the frame with a damp cloth and dry the frames thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
□
Do not clean with abrasive materials, bleach, or solvents.
□
Store the ottoman in a dry, sheltered place when not in use.
□
Keep the ottoman out of fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
BB
C
DD
AA
DD
CC
CC
B
A
.
.