Green
AA
Neutral
Hot
Black
Ground
conductor
White
A
Blue
Black
White
8
Making the electrical connections
WARNING:
Check to see that all connections are tight,
including ground, and that no bare wire is visible at the wire
nuts (except for the ground wire).
WARNING:
To reduce the risk of fire or electric shock, do
not use this fan with any solid-state speed control device.
WARNING:
To avoid possible electrical shock, be sure
electricity is turned off at the main fuse box before wiring.
Assembly — Hanging the Fan (continued)
3a
If you feel you do not have enough electrical wiring knowledge
or experience, have your fan installed by a
licensed electrician.
Follow the steps below to connect the fan to your household
wiring. Use the plastic wire nuts (AA) with your fan. Secure the
plastic wire nuts (AA) with electrical tape. Make sure there are
no loose strands or connections.
□
Make wire connections as follows, using the wire nuts
(AA).
From Fan To Outlet Box
Black + Blue Wires ---------- Black Wire (Hot)
White Wire ------------------- White Wire (Neutral)
From Mounting plate To Outlet Box
Green Wire-------------------- Green or Bare Wire (Ground)
□
Turn the wires upward and push them carefully back
through the mounting bracket into the outlet box. Spread
the wires apart, with the green (ground) and white wires
will be on one side of the outlet box and the black and
blue wires will be on the other side. Make sure that the
wires are still attached to the wire nuts.
Outlet Box
