6.
Rubber packing
mounts
Screws
Rubber
washer
Blade
arm
Figure 11
Figure 10
Blade
Screws
Figure 12
Motor
Blade arm
Slot
Tab
Attaching the Fan Blades
Step 1
Attach blades to blade arms using
three screws and rubber washers.
Start a screw into the
arm, do not
tighten. Repeat for the 2 remaining screws
and washers.
Step 2
Tighten each screw securely starting
with the center screw. Make sure the blade is
straight.
(Fig. 11)
blade
Repeat steps for the remaining
blades.
Step 3
Fasten the blade arms to the motor by
inserting the tab from the blade arms to the
slot in the bottom motor housing, then tighten
the two screws and washers already installed
in the blade arms. (Fig. 12)
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY,
DO NOT BEND THE BLADE ARMS WHILE
INSTALLING, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NO INSERT FOREIGN
OBJECTS BETWEEN ROTATING FAN BLADES.
CAUTION:
Remove 5 rubber packing
mounts from fan motor assembly and
discard before installation. (Fig. 10)
