10
Table Assembly (continued)
3
Connecting the table brace to leg
connectors and table top
4
Placing the table glass and stone
top on the table rim
□
Attach the table brace (K) to the leg connector (J) and table
rim (G) using the bolts (BB) and washers (EE).
□
Tighten all bolts (BB) using the hex wrench (HH).
NOTE
: Tighten each bolt a few turns at a time, alternating
between bolts in a cross-corner pattern (X). This ensures that
the table is level by placing equal amounts of pressure on all
bolt joints. Do not overtighten the bolts.
□
Turn the table over so it is right side up.
□
Carefully place the table glass (L) into the table rim (G).
□
Carefully place the stone top (M) into the table rim (G).
BB
EE
K
G
J
BB
EE
M
L
G