ADDITIONAL PARTS FOR ASSEMBLY (included):
TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION
(not included):
Safety goggles
Wire Strippers
Flathead
Screwdriver
A19 Bulb 60W max.
(not included)
Phillips
Screwdriver
Electrical Tape
Wire Cutters
Ladder
7. Ground Screw
4. Mounting
Screw (x2)
3. Outlet Box
Screw (x2)
6. Decorative
Cap (x2)
2. Cross Bar
Page 3
14. Wire Nut (x3)
INSTALLATION INSTRUCTIONS:
1. Turn off power at main fuse box.
2. Mount cross bar (2) onto junction box (1) with 2 outlet box screws (3) supplied.
3. Fasten open end of ground wire (bare copper or green wire), to ground wire or
ground screw of junction box (1) or ground screw on cross bar (2). (See fig 1)
4. Connect black wire of power supply to black wire of the fixture and the white wire
of the power supply to the white wire of the fixture. ( See fig 1)
NOTE: All wire connections should be made with wire nuts (14) or marrettes (included)
and pushed back into junction box (1).
5. Mount Canopy (5) of fixture over mounting cross bar (2) and secure with 2 decorative
caps (6) supplied.
Page 6
ADDITIONAL PARTS FOR INSTALLATION (included):
10. Metal Washer
12. Diffuser
13. Decorative
Finial