HAMPTON BAY Andross, Руководство пользователя

Страница: 9 / 15

Finishing the Installation
1 . Remove motor assembly from "J" hook. Attach 3
tumbler bolts (in the loose parts bag)to the mounting
bracket, do not tighten. Align slotted holes on plate
at top of motor assembly with 3 tumbler bolts on
mounting bracket. Twist motor assembly to lock
.
(Figure 9)
2 . Place the key hole, t ighten the last one tumbler
bolt, along with the star washer and tighten other 3
tumbler bolts securely. (Figure 9)
3 . Align large screwheads at mounting housing with
slotted holes in mounting bracket. Turn motor
housing conterclockwise, to the LEFT, until it no
longer turns. (Figure 10,11
)
Blade Installation
1. Attach the fan blades to the motor
assembly using the screws and fiber
washer provided, tighten screws securely.
(Figure 12)
2 . Align motor holes to blade and secure
with screws provided, tighten screws
securely. Repeat procedure with
remaining blades. (Figure 12)
Figure 11
Large
Screwheads
Figure 12
Blade Screws
Mounting
Ring
Fiber Washers
Blade Slot
Figure 10
Mounting
Housing
Large
Screwheads
Figure 9
J hook
mounting
bracket
motor
assembly
Screw
6
NOTE:Y OU MAY THINK THAT YOU HAVE TURNED THE
MOTOR HOUSING ENOUGH UPON FEELING IT STOP
WHEN TURNING IT THE FIRST TIME, BUT THAT IS
PROBABLY ONLY THE HALFWAY POINT AND IT IS
EXTREMELY IMPORTANT THAT YOU MAKE SURE
THAT YOU TURN THE MOTOR HOUSING ALL THE WAY
T O E N S U R E T H AT T H E M O T O R H O U S I N G I S
COMPLETELY SECURE. TO DO THIS, WHEN YOU
BEGIN TURNING THE MOTOR HOUSING TWO MORE
INCHES(TO THE LEFT) SO THAT THE SCREWHEADS
REACH THE END OF EACH SLOTTED HOLE, THERE BY
REMAINING SECURE.
NOTE