Assembly
1
Attaching the table legs
2
Attaching the connector bar
□
Place the table rim (A) on a flat surface.
□
Attach the table legs (C) to the table rim (A) using hex bolts
(DD) and washers (CC).
NOTE
: Do not fully tighten bolts.
□
Attach the connector bar (B) to the table legs (C) using hex
bolts (DD) and washers (CC).
□
Check the alignment of the connector bar and table legs.
□
Tighten all the bolts on the table legs and connector bar.
5
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
3
Placing the clear glass on the
table
4
Placing the trays on the table
□
Flip the table over so it is right side up.
□
Put the clear glass (D) on the table.
□
If desired, place one tray (E) on each end of the
table.
DD
CC
A
C
B
C
DD
CC
E
E
D