manualshive.com logo in svg

HAMPTON BAY Alida, Руководство пользователя

Поделиться
Скачать
HAMPTON BAY Alida Скачать руководство пользователя страница 13

10

Installing the 

Light Kit

Remove the plug from the switch housing 
cover. Attach the light kit to the switch housing 
by feeding the light kit wires (black and white) 
through the hole of switch housing and then 
screw it onto the switch housing by nut & lock 
washer. Be sure it is tight enough to prevent 
light kit from vibrating loose. (Fig. 17)

Locate two single white and blue wires in the 
switch housing labeled FOR LIGHT. Make the 
polarized plug connections:
- White to white  - Blue to black

While holding the light kit assembly under 
your fan, snap together the wire connection 
plugs. (Fig. 18)

Carefully push all wires back into the switch 
housing, then install the light kit assembly onto 
the mounting plate with 3 screws provided. Be 
sure to tighten all screws. (Fig. 18)

1.

2.

3.

4.

Figure 17

Install 3 x 40 watts candelabra bulbs (included) 
into the light kit sockets. 

Remove the metal nut, glass cap and decorative 
nut from the light kit. Place glass shade over 
the light kit stem, secure with the metal nut 
(rubber side on the top), glass cap and decora-
tive nut. Do not overtighten (Fig. 18).
   
Restore power and your light kit is ready for 
operation.

5.

6.

7.

NOTE

LIGHT BULBS HAVE NO WARRANTY; CAN BE 

PURCHASED AT ANY HOME DEPOT STORE.

Figure 18

CAUTION

BEFORE STARTING INSTALLATION, DISCON-

NECT THE POWER BY TURNING OFF THE 

CIRCUIT BREAKER OR REMOVING THE FUSE 

AT FUSE BOX. TURNING POWER OFF USING 

THE FAN SWITCH IS NOT SUFFICIENT TO 

PREVENT ELECTRIC SHOCK.

Nut

Switch 
Housing

Light Kit

Lock Washer

Screws

Bulbs

Light Kit
Assembly

Glass Shade

Wire Connection
Plugs

Glass Cap

Metal Nut

Decorative Nut

Plug

Содержание Alida



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды