background image

B

EE

EE

A

C

B

EE

C

7

Installing the canopy

8

     Tuck the connections neatly into the ceiling outlet 

box.

     Slide the canopy (B) up to the mounting bracket (A) 

and place the key hole on the canopy (B) over the 
loose canopy mounting screws (EE) on the mounting 
bracket (A). Turn the canopy (B) clockwise until the 
canopy (B) locks in place at the narrow section of the 
key holes.

     Align the circular hole on the canopy (B) with the 

remaining hole on the mounting bracket (A). Secure 
the canopy mounting screws (EE) previously removed 
in the hole and tighten the two canopy mounting 
screws (EE).

WARNING:

 Make sure the tab on the mounting bracket (A) 

properly sits in the groove in the hanger ball (D) before 
attaching the canopy (B) to the mounting bracket (A) by 
turning the canopy housing until it drops into place.

NOTE:

 Adjust the canopy mounting screws (EE) as 

necessary until the canopy (B) and canopy bottom cover (C) 
are snug.

     Attach the canopy bottom cover (C) to the canopy 

mounting screws (EE) heads on the bottom of the 
canopy (B) by inserting the screw heads into the key 
slots in the canopy bottom cover (C) and rotating the 
canopy bottom cover (C) clockwise.

Attaching the canopy 
bottom cover

Assembly — Hanging the Fan (continued)

12

Содержание AL958-FB




















Отзывы: