HAMPTON BAY 996-530, Инструкция по эксплуатации

Страница: 4 / 24

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
4Nut (#1) 1 Finial (#2) 1 Bottom cover( #9) 1 Hex nut( #3) 1 Lock washer(#8)
ASSEMBLY INSTRUCTIONS:
1.
Shut off power at the fuse box or circuit breaker box, if necessary
remove old fixture and all mounting hardware from outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area,
Take care not to lose any small parts necessary for installation.
3. Install light bulbs in accordance with the fixtures specifications. (DO
NOT EXCEED THE MAXIMUM WATTAGE RATING!!)
4. Place the Glass shade (#7) into the Fixture frame (#4) and secure with 2
pieces of Nut (#1).
5. Insert the nipple with lock washer (#8) and hex nut (#3) into the hole of
the cage inside, then put the bottom cover (#9) over the nipple and secure
with the finial (#2).