Thank you for purchasing this Hampton Bay portable light. This product has been manufactured with the highest standards of
safety and quality.
FEATURES:
1. This convenient portable up-light was designed to provide light to various areas.
2. 5ft 4in. power cord with rotary ON/OFF switch included.
3. Designed to accommodate a 9 watt MAX, CFL self-ballasted bulb. (included)
4. Includes a 120 volt polarized plug.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service Team at 1-877-527-0313 or visit
www.homedepot.com. Please reference your SKU 719-694 or UPC 008938102438
CAUTION:
1. Place the lamp on a flat, solid surface to prevent it from tipping over.
2. Do not place illuminated bulb face down on any type of surface.
3. Keep the fixture at least 6 inches from curtains, furniture, appliances, etc. or any type of combustible materials.
4. Do not exceed the MAX CFL self-ballasted bulb wattage of 9 watts. (see label attached to the lamp shade).
5. Not suitable for wet or damp locations.
IMPORTANT SAFETY INSTRUCTIONS
This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock.
This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter the plug.
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
x1 R20/PAR 20 CFL self-ballasted bulb
INSTALLATION:
1. Screw the bulb into the lamp holder by turning clockwise.
2. Insert the plug into a 120 volt polarized outlet. If the plug does not fit, reverse the
plug so that the wide blade fits into the wide receptacle terminal.
3. Use the inline rotary switch to turn the lamp ON and OFF.
TROUBLESHOOTING:
Problem
Possible Cause
Corrective Action
1. Light bulb is burned out.
1. Replace light bulb.
2. Power is off.
2. Make sure power supply is on.
Light bulb will not illuminate.
3. Faulty switch.
3. Test or replace switch.
Fuse blows or circuit breaker trips when light
bulb is illuminated.
Crossed wires or power wire is
grounding out.
Check wire connections or consult a
qualified, licensed electrician.
PRODUCT MAINTENANCE:
1. To clean the outside of the fixture, unplug the power cord from the 120 volt outlet. Use a dry or slightly, water dampened cloth
to wipe the surface of the fixture. Allow the fixture to dry thoroughly prior to plugging it back in.
2. To clean the inside of the fixture, unplug the power cord from the 120 volt outlet. Remove the bulb. Use a dry or slightly, water
dampened cloth to wipe the interior surface of the fixture. Allow the fixture to dry thoroughly prior to plugging it back in.
3. To clean the light bulb use a dry soft cloth and dust off carefully.
4.
DO NOT
use any cleaners with chemicals, solvents or harsh abrasives as damage and fading may occur.
LIMITED WARRANTY
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of one (1) year(s)
from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and
service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or
replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse,
accident, modifications, alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been
improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty
shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or
any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the
product, such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and
specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained
herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or
damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product.
