HAMPTON BAY 59299 Скачать руководство пользователя страница 6

6

Installation

MOUNTING OPTIONS

WARNING:

 To reduce the risk of fire, electric shock or 

personal injury, mount to outlet box marked “acceptable 

for fan support of 35lbs. (15.9kg) or less” and use screws 

provided with the outlet box. An outlet box commonly 

used for the support of lighting fixtures may not be 

acceptable for fan support and may need to be replaced. 

If in doubt, consult a qualified electrician.

If your ceiling fan does not have an existing UL-Listed 

mounting box, then install one using the following instructions:

 

Disconnect the power by removing the fuses or turning off 
the circuit breakers.

 

Secure the outlet box directly to the building structure. 
Use the appropriate fasteners and materials. The outlet box 

and its bracing must be able to fully support the weight 

of the moving fan (at least 35 lbs. (15.9 kg)). Do not use a 

plastic outlet box.

The illustrations below show three different ways to mount the 

outlet box.

If the canopy touches the downrod, then remove the decorative canopy 
bottom cover and turn the canopy 180° before attaching the canopy to 
the mounting plate.
To hang your fan where there is an existing fixture but no ceiling joist, 
you may need an installation hanger bar as shown above
(available at any Home Depot store).

NOTE:

 You may need a longer downrod to maintain 

proper blade clearance when installing on a steep, sloped 

ceiling. The maximum angle allowable is 30° away from 

horizontal.

Outlet Box

Outlet Box

Recessed

Outlet

Box

Provide Strong

Support

Ceiling

Mounting

Plate

Outlet Box

Hanger Bar

Содержание 59299














Отзывы: