Table Assembly
Attaching the table legs
Attaching the connector ring
□
Place the table top (A) on a soft, flat non-abrasive
surface. Attach the table legs (C) to the table top (A)
using the hex bolts (DD) and washers (EE).
NOTE
:
Do
not
fully
tighten the
bolts
.
Attach the connector ring (B) to the table legs (C) using hex
bolts (DD) and washers (EE). Tighten all bolts. Then cover
the bolt heads with bolt caps (FF).
□
2
DD
EE
1
DD EE
FF
6
Positioning the table
□
Turn the table over and set it down on its legs.
The table is now ready for use.
3
NOTE
:
Please ensure all the bolts are assembled
correctly and use the socket wrench to tighten.
C
□
A
B
A
C
