HAMPTON BAY 553-295 Скачать руководство пользователя страница 1

Hampton Bay Lifetime Limited Warranty

The retailer warrants the fan motor to be free from defects in workmanship and 
material present at time of shipment from the factory for a lifetime after the date of 
purchase by the original purchaser.  The retailer also warrants that all other fan parts, 
excluding any glass or plexiglass blades, to be free from defects in workmanship and 
material at the time of shipment from the factory for a period of one year after the date 
of purchase by the original purchaser.  We agree to correct such defects without charge 
or at our option replace with a comparable or superior model if the product is returned 
to the retailer.  To obtain warranty service, you must present a copy of the receipt as 
proof of purchase.  All costs of removing and reinstalling the product are your 
responsibility.  Damage to any part such as by accident or misuse or improper 
installation or by affixing any accessories, is not covered by this warranty.  Because of 
varying climatic conditions in the United States this warranty does not cover any 
changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling.  
Brass finishes of this type give their longest useful life when protected from varying 
weather conditions.  A certain amount of wobble is normal and should not be 
considered a defect.  Servicing performed by unauthorized persons shall render the 
warranty invalid.  

There is no

 

other express warranty.  The retailer hereby disclaims 

any and all warranties, including but not limited to.  Those of merchantability and 
fitness for a particular purpose to the extent

 

permitted by law. 

 The duration of any 

implied warranty which cannot be disclaimed is limited to the time period as specified 
in the express warranty.  Some states do not allow limitation on how long an implied 
warranty lasts, so the above limitation may not apply to you.  

The retailer shall not be 

liable for incidental, consequential, or special damages arising out of or in 
connection with product use or performance

 

except as may otherwise be accorded by 

law.

  Some states do not allow the exclusion of incidental or consequential damages, 

so the above exclusion or limitation may not apply to you.  This warranty gives specific 
legal rights, and you may also have other rights which vary from state to state.  This 
warranty supersedes all prior warranties.

Lifetime Limited Warranty

Date Purchased  

Store Purchased

Model No.

Serial No.
 
Vendor No.

UPC

553-295

11289

792145351269

Содержание 553-295
















Отзывы: