8
3
Preparing to mount to a wood mounting
surface
□
Loosen the electrical box screws (AA) and turn the mounting
bracket (B) until the heads of the electrical box screws (AA) are in the
large ends of the keyholes, to take down the mounting bracket (B).
□
Drill four 1/8 in. holes at the locations marked on the mounting
surface. You can also use an awl or nail to dimple the screw holes.
□
Connect the metal wiring ring (DD) to the mounting bracket (B) using
the wiring ring screw (CC).
noTe:
The safety cable(s) attached to the mounting bracket (B)
should face away from the mounting surface.
4
Attaching the mounting bracket to the electrical outlet box and mounting surface
□
With help from another person, hold the mounting bracket (B) up to the ceiling and feed the electrical connection wires from the
electrical outlet box through the metal ring (DD) and center opening in the mounting bracket (B).
□
With the electrical box screws (AA) extended to their full length, place the large end of the keyholes on the mounting bracket (B)
over the electrical box screws (AA).
□
Turn the mounting bracket (B) so the heads of the electrical box screws (AA) slide into the narrow portion of the keyholes.
□
Align the four holes in the mounting bracket (B) with the pilot holes in the mounting surface.
□
Insert and tighten the wood screws (BB) until the mounting bracket (B) is flush to the ceiling.
□
Tighten the electrical box screws (AA) to finish securing the mounting bracket (B) to the mounting surface.
Mounting to wood (continued)
B
AA
DD
CC
Mounting Holes
Keyholes
Safety Cable
Keyholes
DD
B
