11
HOMEDEPOT.COM/HUBSPACE
Please contact 1-877-592-5233 for further assistance.
Assembly - Attaching the Fan Blades
Mounting the fan-motor assembly
(standard mount)
7
Attaching the blades to the
blade arms
1
NOTE:
Your fan blades are reversible. Select the blade side
finish which best accentuates your decor.
Assembly - Hanging the Fan (continued)
□
Attach a blade (G) to blade bracket (H) by inserting the screws
(EE) into the holes in the blade (G) and through the blade
bracket (H).
□
Tighten each screw securely.
□
Repeat this step for each blade and blade bracket.
WARNING:
When using the standard ball/downrod
mounting, the tab in the ring at the bottom of the
mounting bracket must rest in the groove of the
hanger ball. Failure to properly seat the tab in the
groove could cause damage to the wiring.
NOTE:
The magnet is pre-attached on the canopy bottom
cover for you to remove and install easily.
□
Align the locking slots of the canopy (C) with the two screws
(HH) and alignment post (KK) in the mounting bracket (A).
□
Push up the canopy (C) and turn it clockwise until the
alignment post (KK) engages to the round hole and the screws
(HH) engage to the key slots.
□
Firmly tighten the two mounting screws (HH).
□
Align the oval shape on the canopy (C) with canopy bottom
cover (FF).
□
Push up the canopy bottom cover (FF) until the screw (HH)
heads engage to the slots on the canopy bottom cover (FF) so
that the magnetic canopy bottom cover (FF) can be attached
to the bottom of the canopy (C) properly.
NOTE:
For better performance with the Wi-Fi system, the
Wi-Fi antenna must be mounted to the ceiling outside of
the fan’s ceiling canopy.
E
C
FF
B
KK
WiFi antenna mount
outside of the canopy
View after installation
D
K
A
HH
G
EE
H
