HAMPTON BAY 52" Huntington III, Руководство пользователя

Страница: 9 / 16

7.
BLUE BLACK
WHITE GREEN
BLUE
BLACK WHITE
WHITE
Outlet
Box
SUPPLY CIRCUIT
Green
Grounding
Lead
BLACK
WHITE
Ground
to
Downrod
Making the Electrical
Connections
REMEMBER to disconnect the power. If
you feel you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
Follow the steps below to connect the fan
to your household wiring. Use the wire
connecting nuts supplied with your fan. Se-
cure the connectors with electrical tape.
Make sure there are no loose strands or
connections.
Connect the ground conductor of the 120v 1.
supply (this may be a bare wire or a wire
with green insulation) to the green ground
lead(s) of the fan (Figure 12). When using
standard ceiling mounting, there are two
green grounding leads; one from the ceiling
mounting plate and one from the ball/down-
rod assembly. When using Close-to-Ceiling
mounting, there is only one green ground
lead from the mounting plate since the ball/
downrod assembly is not used.
Connect the fan motor white wire to the 2.
supply white (neutral) wire using a wire nut
(Figure 12).
ELECTRICAL DIAGRAMS ARE FOR REFER-
ENCE ONLY. OPTIONAL USE OF ANY LIGHT KIT
SHALL BE UL LISTED AND MARKED SUITABLE
FOR USE WITH THIS FAN.
CHECK TO SEE THAT ALL CONNECTIONS ARE
TIGHT, INCLUDING GROUND, AND THAT NO
BARE WIRE IS VISIBLE AT THE WIRE NUTS, EX-
CEPT FOR THE GROUND WIRE.
TO REDUCE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT USE A WALL MOUNTED SOLID
STATE SPEED CONTROL WITH THIS FAN. IT
WILL PERMANENTLY DAMAGE THE ELECTRON-
IC CIRCUITRY.
Figure 12
Connect the fan motor black wire to the sup- 3.
ply black (hot) wire using a wire nut (Figure
12).
After connecting the wires, spread them 4.
apart so that the green and white wires are
on one side of the outlet box and the black
wire is on the other side.
Turn the wire connecting nuts upward and 5.
push into the outlet box.