10
Assembly - Attaching the Fan Blades
Attaching the blades to the blade
brackets
9
□
Attach a blade (G) to a blade bracket (H) by inserting blade
attachment screws (AA) into the holes in the blade (G) and
through the blade bracket (H). Note that the rubber washers
are pre-attached to the blade bracket.
□
Tighten each screw securely.
□
Repeat these instructions for each blade (G) and blade
bracket (H).
Mounting the fan
□
Align the locking slots of the ceiling canopy (C) with the two
screws (LL) in the slide-on mounting bracket (A). Push up to
engage the slots and turn clockwise to lock in place.
□
Firmly tighten the two mounting screws (LL).
□
Install the remaining two mounting screws (JJ) into the holes
in the canopy (C) and tighten firmly.
□
Install the decorative canopy ring (N) by aligning the ring’s
slots with the screws in the canopy (C). Rotate the canopy
ring (N) clockwise to lock in place.
8
WARNING:
When using the standard ball/downrod mounting,
the tab in the ring at the bottom of the mounting bracket must
rest in the groove of the hanger ball. Failure to properly seat
the tab in the groove could cause damage to the wiring.
H
G
AA
D
N
C
LL
A
