5.
SUPPLY CIRCUIT
Ground
Conductor
Outlet Box
Green
Ground
Lead
Ground to
Downrod
B
L
A
C
K
W
H
IT
E
W
H
IT
E
B
L
A
C
K
B
L
U
E
G
R
E
E
N
Figure 6
Making the Electrical
Connections
Follow the steps below to connect the fan to your
household wiring. Use the wire connecting nuts
supplied with your fan.Secure the connectors with
electrical tape. Make sure there are no loose strands
or connections.
Step 1
Connect the fan supply (black) wire and
light supply (blue) wire to the black household
supply wire as shown in Figure 6.
Step 2
. Connect the neutral fan (white) wire to the
white neutral household wire.
household
REMEMBER
to disconnect the power. If you feel
that you do not have enough electrical wiring
knowledge or experience, have your fan installed
by a licensed electrician.
Step 3
Connect the two green fan ground wires,
located on the mounting plate and motor, to the
ground wire.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT USE A WALL
MOUNTED SOLID STATE SPEED CONTROL
WITH THIS FAN. IT WILL PERMANENTLY
DAMAGE THE ELECTRONIC CIRCUITRY.
Step 4
After connecting the wires, spread them
apart so that the green and white wires are on
one side of the outlet box and the black wire is
on the other side.
Step 5
Turn the connecting nuts upward and
push the wiring into the outlet box.
