PARTS INCLUDED FOR INSTALLATION (parts are not to
scale):
1. Screw the Wire Housing (#4) onto Pole 1.
2. Screw Pole 1 onto Pole 2. Be sure that the power cord does not get pinched
between the poles, and that it is totally enclosed within the poles. Pull the
remaining slack of the power cord from the other end of Pole 2.
3. Attach Pole 2 to Pole 3, by following Step 2.
4. Screw the entire pole assembly to the Base (#5). Be sure
that the power cord does not get pinched between Pole 3 and the Base (#5).
Pull the remaining slack of the power cord from the Base (#5).
5. Screw Light Bulbs (#6) into sockets and make sure they do not exceed the
maximum wattage specified on the fixtures wattage rating label.
6. Connect the Polarized Plug (#7) to a standard 110/120 V wall receptacle.
NOTE:
Avoid adjusting the flexible arms to one side (as shown in the
illustration), as the fixture may become unstable and easily tip over.
INSTALLATION INSTRUCTIONS:
Page 4
5 ea A-19 Light Bulbs,
100 Max
(not included) (#6)
1 ea 5-Light
Floor Lamp
