HAMPTON BAY 326-722 Скачать руководство пользователя страница 1

Hampton Bay Lifetime Limited Warranty

The  retailer  warrants  the  fan  motor  to  be  free  from  defects  in  workmanship  and  material 
present at time of shipment from the factory for a lifetime after the date of purchase by the 
original purchaser.  The retailer also warrants that all other fan parts, excluding any glass or 
plexiglass  blades,  to  be  free  from  defects  in  workmanship  and  material  at  the  time  of 
shipment from the factory for a period of one year after the date of purchase by the original 
purchaser.   We  agree  to  correct  such  defects  without  charge  or  at  our  option  replace  with  a 
comparable  or  superior  model  if  the  product  is  returned  to  the  retailer.  To  obtain  warranty 
service, you must present a copy of the receipt as proof of purchase.  All costs of removing 
and reinstalling the product are your responsibility.  Damage to any part such as by accident 
or  misuse  or  improper  installation  or  by  affixing  any  accessories,  is  not  covered  by  this 
warranty.  Because of varying climatic conditions in the United States this warranty does not 
cover  any  changes  in  brass  finish,  including  rusting,  pitting,  corroding,  tarnishing  or 
peeling.    Brass  finishes  of  this  type  give  their  longest  useful  life  when  protected  from 
varying  weather  conditions.    A  certain  amount  of  wobble  is  normal  and  should  not  be 
considered a defect.  Servicing performed by unauthorized persons shall render the warranty 
invalid.  

There is no

 

other express warranty.  The retailer hereby disclaims any and all 

warranties,  including  but  not  limited  to.    Those  of  merchantability  and  fitness  for  a 
particular purpose to the extent

 

permitted by law. 

 The duration of any implied warranty 

which cannot be disclaimed is limited to the time period as specified in the express warranty.  
Some  states  do  not  allow  limitation  on  how  long  an  implied  warranty  lasts,  so  the  above 
limitation  may  not  apply  to  you.   

The  retailer  shall  not  be  liable  for  incidental, 

consequential,  or  special  damages  arising  out  of  or  in  connection  with  product  use  or 
performance

 

except as may otherwise be accorded by law.

  Some states do not allow the 

exclusion of incidental or consequential damages, so the above exclusion or limitation may 
not  apply  to  you.    This  warranty  gives  specific  legal  rights,  and  you  may  also  have  other 
rights which vary from state to state.  This warranty supersedes all prior warranties.

Lifetime Limited Warranty

Date Purchased  

Store Purchased

Model No.

Serial No.
 
Vendor No.

UPC

326-722
326-946

11289

792145350651(326-946)

792145350644(326-722)

Содержание 326-722
















Отзывы: