background image

Lifetime Limited Warranty

Date Purchased  

Store Purchased

Model No.

Serial No.
 
Vendor No.

UPC

290-286

219054

718212340219

Hampton Bay Lifetime Motor Warranty

The retailer warrants the fan motor to be free from defects in workmanship and material 
present at time of shipment from the factory for a lifetime after the date of purchase by the 
original purchaser.  The retailer also warrants that all other fan parts, excluding any glass or 
plexiglass parts, to be free from defects in workmanship and material at the time of shipment 
from the factory for a period of one year after the date of purchase by the original purchaser.  
We agree to correct such defects without charge or at our option replace with a comparable or 
superior model if the product is returned to the retailer.  To obtain warranty service, you must 
present a copy of the receipt as proof of purchase.  All costs of removing and reinstalling the 
product are your responsibility. Damage to any part such as by accident or misuse or 
improper installation or by affixing any accessories, is not covered by this warranty.  
Because of varying climatic conditions in the United States this warranty does not cover any 
changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling.  Brass 
finishes of this type give their longest useful life when protected from varying weather 
conditions.  A certain amount of wobble is normal and should not be considered a defect.  
Servicing performed by unauthorized persons shall render the warranty invalid.  

There is no

 

other express warranty. The retailer hereby disclaims any and all warranties, including 
but not limited to.  Those of merchantability and fitness for a particular purpose to the 
extent

 

permitted by law. 

 The duration of any implied warranty which cannot be disclaimed 

is limited to the time period as specified in the express warranty.  Some states do not allow 
limitation on how long an implied warranty lasts, so the above limitation may not apply to 
you. 

The retailer shall not be liable for incidental, consequential, or special damages 

arising out of or in connection with product use or performance

 

except as may 

otherwise be accorded by law.

 Some states do not allow the exclusion of incidental or 

consequential damages, so the above exclusion or limitation may not apply to you.  This 
warranty gives specific legal rights, and you may also have other rights which vary from 
state to state.  This warranty supersedes all prior warranties.

Содержание 290-286
















Отзывы: