HAMPTON BAY 1LT, Инструкция по эксплуатации

Страница: 6 / 24

Page 6
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
2ea Lock Nuts (#2) 3ea Wire Connectors (#8) 1ea Cross Bar (#9)
2ea Outlet Box Screws (#10) 2ea Mounting Screws (#11) 1ea Ground Screw (#12)
INSTALLATION INSTRUCTIONS:
1.
Screw the two Mounting Screws (#11) onto the Cross Bar (#9). Mount the Cross Bar (#9)
to the Outlet Box (#7) using the two Outlet Box Screws (#10). [Make sure the threads of
the Mounting Screws (#11) are facing outside when the Cross Bar (#9) is attached to the
Outlet Box (#7).]
2.
Wrap the ground wire from the fixture around the Ground Screw (#12) on the Cross Bar
(#9), and then connect the ground wire from the fixture to the ground wire from the
Outlet Box (#7). Connect the white wire from the fixture to the white wire (neutral wire)
from the Outlet Box (#7). Connect the black wire from the fixture to the black wire (live
wire) from the Outlet Box (#7). Cover the three connections using the three Wire
Connectors (#8). Wrap the three wire connections with electrical tape for a more secure
connection. Position the wires back inside the Outlet Box (#7).
Note: If you have
electrical questions, consult your local electrical code for approved grounding methods.
3.
Place the fixture body on the wall by aligning the protruding Mounting Screws (#11) all
the way through the holes on the Wall Plate (#1). Tighten the fixture to the wall by
screwing the two Lock Nuts (#2) onto the two protruding Mounting Screws (#11).
4.
Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn the
light switch on the wall and the light Switch (#13 on Page 5) on the fixture to activate the
fixture.