HAMPTON BAY 178 128, Руководство пользователя

Страница: 8 / 17

5
WARNING
THE TAB IN THE RING MUST REST IN THE
GROOVE OF THE HANGER BALL AS FIGURE 12.
FAILURE TO PROPERLY SEAT THE TAB IN THE
GROOVE COULD CAUSE DAMAGE TO WIRING.
Installing Fan to the
Electrical Box
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR OTHER PERSONAL INJURY.
MOUNT FAN ONLY TO AN OUTLET BOX OR
SUPPORTING SYSTEM MARKED ACCEPTABLE
FOR FAN SUPPORT AND USE THE MOUNTING
SCREWS PROVIDED WITH THE OUTLET BOX.
Pass the 120-volt supply wires through the
center hole in the hanger bracket as shown in
Figure 11.
Install the hanger bracket on the outlet box
with the screws and washers provided with
your outlet box. (Figure 11)
Security tighten the two mounting screws.
Carefully lift the fan assembly up to the hanger
bracket and seat the hanger ball in the bracket
socket. Make sure the tab on the hanger bracket
socket is properly seated in the groove in the
hanger ball. (Figure 12) This will help to
balance the ceiling fan.
1.
2.
3.
4.
Figure 11
UL Listed Outlet Box
Hanger Bracket
120V
Wires
Mounting
Screws
(Supplied
with Electrical Box)
Tab
Figure 12
Groove
Tab
Figure 10
Hanger Ball
Rubber Cover
Hanger Ball
Motor Wires
Route the wires through the hanger ball rubber
cover and then attach the rubber cover onto the
hanger ball. (Figure 10) 7.