9. Installing the Mounting
Plate
Step 1.
Remove 1 of the 3 screws from the
mounting ring and loosen the other 2 screws.
(Do not remove)
Step 2.
Place the key holes on the mounting
plate over the 2 screws previously loosened from
the mounting ring, turn mounting plate until it
locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 19)
Figure 19
Mounting plate
Mounting ring
Screws
10. Installing the Light
Kit
REMEMBER:
To disconnect the power.
The fan blades must be already attached to
the fan.
Step 1.
Loosen the 3 screws from the
mounting plate. (Do not remove)
Step 2.
Raise and hold the light kit close to
the mounting plate and proceed to do the
wire connections. Connect the white wire
connector from the light kit and fan, follow
the same procedure with the black wire
connectors. (Fig. 17)
Step 3.
Place the key holes on the light kit
over the 3 screws previously loosened from the
mounting plate, turn light kit until it locks in
place at the narrow section of the key holes.
Secure by tightening the 3 screws previously
loosened.
(Fig. 17).
Figure 20
Connector
plugs
Screws
Mounting plate
Light
kit
