HAMPTON BAY 1007723933 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 10

HAMPTON BAY 1007723933 Скачать руководство пользователя страница 6

6

Installation (continued)

4

Mounting the Countertop to your

Cabinets

□

Mount the countertop to the cabinet frame or drill overized
holes in your support blocks.

□

Using washers, screw the countertop all the way, then
withdraw the screw by a quarter turn to preserve the
natural wood work, while keeping the countertop in
position.

5

Joining Countertops

COMMON JOINT METHODS

Butt Joint:

For best dimensional stability we suggest using a butt

joint for 90-degree transition.

NOTE:

Some product will have a radius on the edge large

enough that it will need to be trimmed off. Using a router
or circular saw with a straight edge, cut off the radius just
short of the width of the piece you are joining to. Then with
a jig saw or file you will need to chamfer a 45-degree miter
so each radius will join nicely at the seam.

Miter Joint:

Another option is to cut both pieces at a 45-degree

angle.

NOTE:

This joint can be more difficult to cut and can

be prone to opening at either end of the miter over time
because each board may expand/contract differently.

COMMON JOINERY METHODS

□

Miter Bolt:

Use at least 3 miter bolts for a 24 inch countertop

spaced appropriately to keep joint tight along the full length.

□

Biscuit/Mortise and Tenon joint:

Use 3 to 4 biscuit/tenons for

a 24 inch countertop. To pull this joint together you will need
to join by using a:

□

Pocket bore fixture that can drill angular holes to use
screws to pull it tight.

□

Temporary clamp block: Screw a block on the bottom of
each piece parallel with the joint line, then attach and
tighten clamps till joint is tight.

Butt joint with miter bolts

Miter joint with biscuit/tenons and pocket bore

«
...
4
5
6
7
8
...
»

Содержание 1007723933











Отзывы:

Нет отзывов